Torque Transducer type TQ-660 is based on Technology of German Torque Transducer. This transducer is suitable for applications in laboratory as well as industrial environmental because of co***ct outline and multiple mounting options. It adopts contact less transfer method in Electricity supplement and measurement voltage so that it can last long time without maintenance. Revolution speed test can be adopted according to different application.
Techn.specifications:
Measurement Range: 0¡«5;10;20;50;100;200;500;1K;
2K;3K;5K;10K;20K;30K;50K£Î.m 60KN 80KN
Output£º4¡«20m£Á 1¡«5£Ö 0¡«10£Ö
frequency: :0 Torque: 10 KHZ forward direction measurement range: 15 KHZ
Reverse measurement range: 5 KHZ
Rev.max: 30000rpm
Supply Voltage: ¡À15VDC 24VDC
limit frequency: 100 ¦Ìs
Operating Temperature£º-40¡«60℃
Mechanical Overload£º120%
sensitivity£º0.1% 0.25% 0.5%F.S
zero point£º<0.5%
repeat£º¡Ü0.1%F&©|8226;S
***ention£º¡Ü0.1%F&©|8226;S
Linearity£º¡Ü0.1%F&©|8226;S
Relative Humidity£º¡Ü90%RH
Special Features:
¡ñInner side we adopt unique contact less transfer method
¡ñIt can measure the static and act ional torque
¡ñNo need to reset when measuring torque
¡ñWe adopt digital technology in voltage to resist the outer influence.
¡ñInput the negative and positive and fluctuation protection. output torque, revolution speed voltage protection
¡ñ There are no resistance parts so that it can operate with high speed for long time.
¡ñAccuracy measurement has nothing to do with revolution speed or direction.
¡ñ High accuracy and stability
¡ñtorque, revolution speed and power measurable
¡ñlight, mounting convenient
¡ñHigh reliability, long life-***n
¡ñ No specific requirement for mounting.
mounting instruction
1¡¢Use the coupler to install the Torque Transducer between power end and the load.
2¡¢The coupler should be installed next to the Torque Transducer roller
3¡¢The position error should be less than 0.1mm when the rollers of power facility, load facility and Torque Transducer on th |
Home
